Mustang Care
While MUSTANG sheet from Plaskolite is a very strong and impact-resistant sign material, proper care and handling is still required to prevent damage during fabrication, shipping, storage and cleaning.
Safety Concerns
MUSTANG sheet, like other thermoplastic sheet materials, is combustible. Do not place or store in or near open flame or other sources of ignition. Always consider fire precautions when working with thermoplastic sheet materials.
Storage
It is recommended that Mustang sheet be stored horizontally, on the supplied flat bulk skids, in a well-ventilated, constant temperature environment. Avoid storing in areas where the temperature could exceed 100° F. A-frames or special racks can be used to store the sheet vertically. The rack construction should allow the sheet to lean approximately 10°.
Handling
Mustang sheet is covered with a film masking, providing minimal scratch protection to the sheet surface area. Care should be taken when handling, as wood surfaces, dirt, chips of wood, and metal can tear the masking exposing the sheet to possible damage.
Masking Removal
The protective masking can be easily removed. Start at a corner and peel back at an approximate 45º angle. The buildup of static charge is possible, and may cause small shocks to the person removing the masking. Wiping the surface area of the sheet with a damp cotton cloth can reduce the amount of static charge.
Cleaning
MUSTANG sheet, like all plastics used in sign faces, needs to be and should be cleaned periodically (1-2 times/year). A regular cleaning program will help minimize any visible weathering of the sign face from dirt, grime, rain, and other natural elements.
For more heavily weathered sign faces, rinse first, then use Formula 409® with a soft cotton cloth, then rinse with clean water to remove the cleaning agent as quickly as possible.